Do you have dents in your stainless steel appliances? If so, don’t worry – there are several easy ways to get rid of them! In this blog post, we’ll share three different methods removing pesky dents from your stainless steel appliances. So, we’ve got you covered whether you’re dealing with a small dent or a big one. You just need to keep reading this article to learn how to get dents out of stainless steel appliances!
Identify the type of dent on your stainless steel appliance or stainless steel fridge
Every stainless steel appliance is bound to get a dent at some point. Most dents are small and barely noticeable, but they can still be frustrating. To help you understand your options, here is a guide to the different types of a dent on your stainless steel appliance:
Shallow Dents: These dents are usually caused by dropped objects or minor accidents. They tend to be shallower than deep dents and are usually less noticeable. If you have a shallow dent in your stainless steel appliance, you can remove it with a soft cloth and gentle pressure.
Deep Dents: Deep dents are usually caused by more significant impacts, such as car accidents or falling objects. They can be challenging to remove, and they may require professional repairs. If you have a deep dent in your stainless steel appliance, it is best to use a good dent removal kit.
Permanent Dents: No matter how much pressure you apply, permanent dents cannot be removed. They are usually caused by severe impacts, such as explosions or intentional impacts (such as using a hammer). If you have a permanent dent in your stainless steel appliance, you will need to replace the entire appliance.
Despite their unsightly appearance, dents do not affect the function of stainless steel. However, they can compromise the aesthetic appeal of the metal, making it look old and worn. As such, many people choose to have dents repaired for cosmetic reasons.
Easy Ways to to get dents out of stainless steel refrigerator
Use a hairdryer or heat gun to heat up the area around the dent area on your fridge
Most people have experienced the frustration of accidentally denting their fridges. Whether it’s from a misplaced can of soda or a swinging door, dents can be challenging to remove. However, there is a simple trick that you can use to get rid of those pesky dents.
With patience and the right tools, you can fix the dent yourself. You can remove the dent yourself with a hairdryer and an air duster. Here’s how: first, point the hairdryer at the dent and turn it on to the highest setting. Then, hold the air duster up side down about 2-3 inches away from the fridge and use it to blast the area around the dent.
The combination of heat and airflow will cause the metal to expand, causing the dent to pop out. Just be careful not to hold the hairdryer in one spot for too long, as you could damage the paint or even melt the plastic. With this simple trick, you can return your fridge to look new in no time.
Fix dents in stainless steel refrigerator using stainless steel dent repair kit.
Dents and dings are a fact of life, but that doesn’t mean you have to live with them. There are several ways to remove small dents from your car or appliances; if the first method does not work for you, you can repair the dent using another most effective way, using a dent puller glue tab.
These tabs are made of a strong adhesive that can adhere to the metal surface, and once in place, they provide the necessary leverage to pull the dent out. Here’s how to use them:
First, clean the area around the dent. You want to make sure no dirt or debris could prevent the tab from adhering properly. Next, heat up the glue sticks and connect them to the gun. Preheat for 5-10 minutes.
Then, according to the size of the dent, choose the appropriate-sized glue puller tab. Put a generous amount of heated glue on the tab and place it in the center of the dent. Hold it in place until it dries (this should take 8-10 minutes). The cooling time is important – if it’s too short, the glue won’t be effective; if it’s too long, it will be difficult to remove.
Once the glue has cooled, use a golden dent lifter or bridge dent puller to align and press on the tab. This will release the suction and allow you to pull up on the tab, removing the dent in the process. Repeat these steps until the dent is completely gone.
Finally, use alcohol to clean any lingering glue from both the fridge surface and the puller tabs. And that’s it! You’ve now removed that unsightly dent without any expensive repairs or professional help.
Polish the steel appliance or fridge area where dent was there with a soft cloth
If you have a steel appliance or fridge with a dent, you can try to remove it by polishing the area with a soft cloth. This will help to smooth out the dent and make it less visible. You may need to apply pressure to the cloth in order to get the desired effect. Be sure to move the cloth in a circular motion so that you don’t end up with a streaky finish.
If the dent is still noticeable after polishing, you can try using a hairdryer to heat up the area and then apply pressure to the dent with a spoon or other blunt object. Finally, if all else fails, you can always cover up the dent with a sticker or piece of tape.
There you have it! These methods will surely help you to get dents out of the stainless fridge. We hope that this article was helpful and that you feel confident taking on dent removal yourself. As always, if you have any questions or comments, please reach out to us via our website or comment below. We love hearing from you!
If you are also looking to fix dents on your car, you should read our article on How To remove dents from a car.