This article will guide you on how to repair microwave not heating issue. The solution to this type of appliance related problem is highly depended on the device condition, your way of handling and the past incidents. It’s crucial to pay close attention to the directions and to use caution at all times.
How to Repair Microwave Not Heating
Tools You’ll Need
For this repair, you’ll need some simple tools, which you may readily acquire at your neighbourhood electronics shop. These tools come with an extra safety fuse.
|Serial No.||Tools and Materials Needed|
|1.||Replacement safety fuse|
|6.||A new safety fuse|
Always put safety first while having appliances repaired. Before you start any work, be sure your microwave is disconnected. This eliminates the chance of receiving an electrical shock.
Step 1: Unplugging the Microwave
Make sure your microwave is securely unplugged from the outlet before you begin. To stop accidents, you must take this action.
Step 2: Removing the Cover
To access the internal parts, carefully remove the microwave from the cabinet. Avoid hurrying this process and be patient.
Step 3: Checking the Condenser
Short the condenser’s terminals to make sure it is not loaded before continuing. Always put your own safety first.
Step 4: Inspecting the Safety Fuse
A safety fuse located inside the microwave is frequently to blame when it doesn’t heat up. Take a good look at this component.
Step 5: Replacing the Safety Fuse
Replace the safety fuse with a new one if you’ve found it to be faulty. These are easily accessible and reasonably priced in most electronics retailers.
Step 6: Reassembling the Microwave
Reassemble your microwave carefully after installing the new safety fuse. Ensure that each component is in the proper location.
Step 7: Testing Your Microwave
Reconnect your microwave to the power outlet, but make sure the protective cover is not attached. This is a crucial safety precaution. Check to see whether your microwave is heating up now.
Pros and Cons
- Quick and inexpensive repair
- No need for professional help
- Increased appliance lifespan
- Saves money on replacement
- Requires some basic technical skills
- Must be cautious to ensure safety
You can frequently fix your microwave oven yourself by carefully following these procedures and taking your time.
This article is intended to assist you in identifying and possibly resolving a heating issue with your microwave. However, it’s always a good idea to consult with a qualified microwave specialist if the issue persists or if you feel uneasy about the repair procedure. You can also claim a free replacement or repair service if your microwave is within the warranty period.
FAQ on How to Repair Microwave Not Heating
Is it safe to repair my microwave on my own?
Even though this fix is rather straightforward, put safety first. It is essential to see an expert if electrical work makes you uneasy.
What if the safety fuse replacement doesn’t work?
There might be a more complicated issue if changing the safety fuse doesn’t fix it. It’s best to get in touch with a technician in these situations.
Where can I find a replacement safety fuse?
Most electronics or appliance stores have replacement safety fuses. They are frequently inexpensive and widely accessible.
How do I ensure that the safety fuse is the issue?
Check for continuity using a multimeter to see if the safety fuse is malfunctioning. If there is no continuity, it is probably the issue.
Can a microwave’s safety fuse be reset instead of replaced?
Safety fuses should often be replaced rather than reset. It’s best to swap out a bad fuse to ensure functionality and safety.
You May Also Be Interested In
ALSO READ SECTION
If you are also looking for some excellent deals and a guide on the best Gas Stove, you can check our other article as well.